Wood Floor Sanding and Refinishing in Manhattan NY
Manhattan Residential and Commercial Wood Floor Refinishing
Wood Floor Sanding and Refinishing in Manhattan NY, Lower Manhattan, Midtown Manhattan, is recommended to remove moderate to severe scratches or gouges in wood floors. This process will make your floors look new again and restoring luster to a worn out finish. This is not a just temporary solution, you are getting new floors that will last for the next 15, 20 or even 50 years. We offer wood floor sanding and refinishing in Manhattan NY, Brooklyn, Queens, Bronx, Staten Island and Westchester County.
Let us perform an on-site visit, and we will evaluate the current condition of your hardwood floors. To the untrained eye, they may all look the same. That’s why you can count on our experience to accurately assess your flooring situation. During our visit, we would also like to learn more about your personal preferences. Hardwood floor refinishing gives you a lot of freedom with the choice of color, finish, and overall look of your floors. Wood floors can last a lifetime, but often they need a little help.
Sanding and Refinishing hardwood floors has come a long way in the past years. Our sanding equipment has become virtually dustless, stains and finishes are low V.O.C and curing times have shortened. The best time to sand and refinish your hardwood floors is when you move into a new house or apartment, since all the furniture, rugs, etc, need to be removed from the area during the process. View our projects on INSTAGRAM and be our friend following us.
Wood Floor Sanding and Refinishing Process
Your hardwood floor are sanded down to the bare wood using a course, medium and fine sand paper, floors are then buffed/screened, vacuumed and tacked, 1 coat of sealer is applied. When the sealer coat is dry, we then buff, vacuum and tack in between each additional coats of urethane to insure proper adhesion and smoothness.
Wood Floor will be sanded down to the bare wood using a course, medium and fine sand paper. Floors are then buffed/screened, vacuumed and tacked and 1 coat of stain is applied. (Samples of stain will be applied to the floor so you may choose a color) when the stain is dry, 1 coat of sealer is applied. When the sealer coat is dry, we then buff, vacuum and tack in between each additional coat of urethane to insure proper adhesion and smoothness.
Routine cleaning involves sweeping, dust mopping or vacuuming using the bare floor setting to remove dust and dirty. Clean spills immediately with a dry or slightly damp cloth. Don’t use wet mops or steam mops, which will damage the finish and the wood over long periods of time.
It is best to use a cleaner made specifically for the finish on the floor, Puma Hardwood Flooring can provide or recommend to you when the job is completed. Over time, when your wood floors start to look a little dull, we can be renewed through recoating. This involves applying a new coat of wood floor finish.